CEMARKING for consumer products and toys MADE EASY!
WITH OUR EXPERT SUPPORT
All you have to do is affix the CE mark.
Willy Lebherz
Director & founder of easyCE GmbH
Declaration of conformity done!
Receive your CE declaration of conformity ready for signature.
Risk assessment completed!
CE mandatory risk analysis conducted.
Relevant directives & standards applied!
Your product evaluated against relevant directives and standards.
Technical documentation created!
Receive a pragmatic, user-friendly operating manual.
CE mark attached!
Simply affix the CE mark and you're done.
More than 300 CE-Markings for machinery since 2021 and more every day...
This is what you need to take into account when CE marking your product
AS PRODUCER OF TOYS
AS INTRODUCER OF TOYS
AS DEALER OF TOYS
You ensure that your products are designed and manufactured in accordance with the applicable regulations. To do this, you prepare the necessary technical documentation and carry out the conformity assessment procedure. After successful testing, you issue the EC declaration of conformity and affix the CE marking. We at easyCE are your partner to help you meet all legal requirements efficiently and reliably.
You also keep all relevant documents for ten years and ensure the conformity of your production through continuous testing. Your toys always have an identification number and your contact information. You ensure that all toys contain instructions for use and safety information in understandable language. If non-conformities are identified, you immediately take corrective measures and inform the relevant authorities.
Only with easyCE, CE marking is worry-free
Approach to CE marking
Flexibility and concept of support
Scope & scale of support
Contact during project work
Simplified and pragmatic approach to CE marking to ensure compliance
In line with to your needs, our experts will take you along the CE marking journey
You choose our support model: From "One-stop-shop full service", to partial and modular - whatever you prefer
First things you receive your dedicated, personal CE expert who will support you along the entire process
Other CE service providers
Often without a sense of proportion and unnecessarily complicated
Mostly flexible but often bureaucratic
Mostly flexible in the extent of support
Mostly personal contact
CE software
Follows a standardised process that does not take special features into account
Double burden for you: Software administration + no support for processing
Only according to software scope and purchased modules
No contact
We simplify CE-marking not the opposite
Reference projects
CE marking for smart drinking bottle
easyCE supports the conformity assessment procedure and the preparation of an operating manual for a smart drinking bottle for storing and drinking liquid foods. In addition, the drinking bottle communicates as a mobile device with the appropriate water dispenser.
CE marking for illuminated sign for outdoor use
easyCE supports the entire conformity assessment procedure including risk assessment for an illuminated sign which is used as an illuminated sign in the lettering in garages and other places where information is displayed with an illuminated sign.
Considered: 2014/30/EU and various harmonized standards (e.g. EN 60335-1: 21012-10, EN 60529: 2001-02)
CE marking for intelligent water dispenser
easyCE supports the entire conformity assessment procedure including operating instructions for an intelligent water dispenser for use in private and public spaces. The wide range of functions of the device, including cooling and boiling tap water, filtering, cleaning and sparkling, were particularly important during the conformity assessment procedure.
Considered: Machinery Directive, EMC Directive, RoHS Directive, WEE Directive, Low Voltage Directive, numerous harmonized standards (e.g. DIN EN 894-1, DIN EN ISO 11200, DIN EN ISO 11688-1)
Conformity assessment procedure and CE marking for WPC composite materials in consumer products
easyCE successfully supports the CE marking process up to the ready-to-sign Declaration of Conformity for innovative wood-plastic composite materials. The materials comply with strict limits for chemical migration according to DIN EN 71-3 and are free from PAHs, phthalates and formaldehyde. The particular challenge was the comprehensive testing according to EN 71-9 and EN 71-3, considering all relevant harmful substances to ensure the highest safety standards in accordance with the Toy Safety Directive.
Considering: 2009/48EG
Conformity assessment procedure and CE marking for automated cat litter cleaning devices
easyCE successfully supports CE marking up to the ready-to-sign Declaration of Conformity for electronic household appliances for automated cleaning of cat litter. During the conformity assessment, special requirements for electrical safety according to EN 60335-1 and electromagnetic compatibility according to EN 55014-1 were considered. A particular challenge was securing the Wi-Fi interface against unauthorized access to ensure both data protection and operational safety of the device.
Considering: 2014/30/EU, 2014/35/EU
Conformity assessment procedure and CE marking for wooden wall clocks
easyCE successfully supports CE marking up to the ready-to-sign Declaration of Conformity for natural wooden wall clocks. Despite the product's low technical complexity, CE marking requires a structured risk assessment according to EN ISO 12100. Special attention was paid to compliance with the RoHS Directive 2011/65/EU, which regulates the use of hazardous substances in electrical and electronic equipment. Through methodical documentation and careful material selection, both product safety and conformity with relevant EU regulations were ensured.
Considering: 2011/65/EU
Conformity assessment procedure and CE marking for electrical facial cleansing brushes
easyCE successfully supports CE marking up to the ready-to-sign Declaration of Conformity for waterproof facial cleansing brushes with LED technology. During product analysis according to EN ISO 12100, all relevant usage limitations were defined and potential hazards systematically evaluated. A particular challenge was ensuring water resistance while maintaining EMC compliance according to EN 61000-6-3. The special silicone construction with ergonomic design according to EN 614-1 guarantees both user safety and optimal functionality.
Considering: 2011/65/EU, 2014/30/EU
Learn more about our project references and success stories
Get CE-marking done in 3 simple steps
Step 1
Request expert opinion
Ask for our expert opinion free of charge and find out what is necessary for the CE marking of your product. Be prepared to describe your product in broad terms.
Step 2
Receive our offer
If your product is subject to CE marking, we offer you our support with the CE marking and all accompanying measures. We will be happy to explain necessary steps on the phone.
Step 3
We get it done
When you place an order, you will be assigned your own personal CE expert who will carry out your CE marking and accompany you throughout the entire process. Your expert will also be at your side after the CE marking has been successfully completed.
We support you with CE marking and all accompanying measures
Frequently asked questions
Is CE marking required for jewelry, e.g. silver necklaces, earrings, etc.?
If a piece of jewelry does not contain any electronic components, as is often the case with watches, and is not a toy, then it cannot and must not bear a CE mark. We will be happy to test your product and provide you with the certainty.
Which substances are not allowed in toys or must not exceed limit values?
The Toy Directive specifies various substances that may not be present in toys or may only be present up to certain limit values.
As a manufacturer, you should check the declaration of performance of the materials you use in production and ensure that they meet the requirements of the directive. One of these substances is formaldehyde. From 2020, stricter limits for formaldehyde in toys will apply (however, materials manufactured before this date will be protected). The limit for formaldehyde in wood products used in toys that are used by children under 36 months or are intended to be put in the mouth is 0.1 ml/m3 (test method: EN 717-1:2004).
Is CE marking required for furniture (not children's furniture)?
No, CE marking is not required for normal furniture that is not intended for use by children. If it is children's furniture, it must be assessed according to the Toy Safety Directive and is subject to CE marking.
Trust the experts of product safety and compliance
Willy Lebherz - Founder and Managing Director of easyCE
- Expert in product safety and compliance, since 1995
- Recipient of the "Medal of the Order of Merit of the Federal Republic of Germany", awarded in 1983 by the then Federal President Carl Carstens
- Master of measurement and control technology
- Captain (ret.), Project Officer for Technical Logistics in the Army Material Office and Chief of the Telecommunications Repair Company
easyCE is a digital, dynamic engineering office with a focus on product safety and product conformity. We support manufacturers, operators and dealers in designing products safely and offering them on the market in compliance. We are a "full-service provider" and can take over the entire conformity assessment process for you if you wish. To do this, we support you in carrying out risk assessments, researching standards, product analyses, developing suitable safety precautions, preparing user-friendly technical documentation, coordinating tests and all other accompanying measures. easyCE was founded in southern Germany, but is now active globally.
We know the special features that you need to take into account when CE marking your product and we are happy to help you.